|
EVAP Tester Details & Specifications
Low-Pressure Fuel Evaporative System Testing
for the California Smog Check Program
11,000,000 vehicles need their fuel evaporative system tested.
We have the only all-in-one system to do it.
EVAP Tester Technical Specifications
|
Electrical/Mechanical:
- Tester Size: roll-around 2 wheel ruggedized cart 24 1/” W x 14 1/” D x 39” H
- Weight: 60 lbs. (including adaptors and accessories)
- Inlet Hose Connection: industrial quick connect w/ integrated line and filter regulator
- Fuel Tank Connection Hose: 15 ft., red, grounded
- Power:110VAC
Measurement:
- Test Duration: 2-6 minutes
- Test Pressure Applied: 14” H20 Gauge +/- 1”H2O (about 1/” psi)
Certifications:
Communications and Data Storage:
- Communications to Data Depot: RJ11 - 56K V.92 modem
- Test Storage: 100 tests, 100 calibration records in non-volatile memory, configurable upload frequency
|
Operating Conditions:
- Temperature Range: 20° - 120° F
- Altitude Range: 0 - 5,000 ft.
- Humidity Range: 0 - 95% RH (non-condensing)
Accessories:
- Filler Neck Adapters: 3 total (color coded) w/ quick connects
- Calibration Tank: Integral to cart is 2 gallon tank with .020” and .040” standardized holes, frequency as specified by State
- Hose Pinching Pliers: Locking needle nose w/ 3 ft. red flags (2 sets)
- EVAP Line Hose Plugs: Tapered, variety of hoses to accommodate 1/8” to 3/8” ID
- Leak Verifier: Uses small balloon for hose pinch verification, accommodates hoses from 1/8” to 3/8” ID
Options:
- Smoke Machine diagnostic option
- Regulator assembly for shops choosing nitrogen
|
|
|
|
